82. Carbon nanotube sandpaper for atomic-precision surface finishing

Sukkyung Kang, Ji-hun Jeong, Hyun Jun Ryu, Gunhoo Park, Sanha Kim

Advanced Composites and Hybrid Materials, accepted.

81. Challenges and innovations in chemical mechanical polishing in the More-than-Moore era

Hyeongmin Je, Sukkyung Kang, Sanha Kim

International Journal of Precision Engineering and Manufacturing - Green Technology, online published, 2026. [doi]

80. Effects of grain size on bonding performance of Cu-to-Cu bonding

Hyun-Dong Lee, Sukkyung Kang, Yeo-Jin Kim, Eun-Ho Lee, Sung-Ho Park, Won-Seob Cho, Yong-Jin Park, Alexandra Haag, Soichi Watanabe, Marco Arnold, Sanha Kim, Hoo-Jeong Lee

Journal of Materials Research and Technology, vol. 39, 8965-8974, 2025. [doi] [pdf]

79. Direct removal of ultrafine surface contaminants using polymeric brushes with controlled pore sizes

Somin Shin, Hyun Jun Ryu, Seong Jae Kim, Dong Geun Kim, Sanha Kim

Journal of Materials Processing Technology, vol.346, 119128, 2025. [doi]

78. An ionic gelation powder for ultrafast hemostasis and accelerated wound healing

Youngju Son, Kyusoon Pak, Taehoon Lee, Monica Celine Prayogo, Jinyoung Choi, Sukkyung Kang, Minjoo Kang, Byungkook Oh, Sang Yu Sun, Sanha Kim, Sung Gap Im, Sangyong Jon, Steve Park

Advanced Functional Materials, online published, 2025. [doi] [pdf]

77. Chemical mechanical polishing of plasma-modified Cu/polymer interfaces for advanced hybrid bonding

Sukkyung Kang, Chansu Jeon, Juseong Park, Seulah Park, Kyung Min Kim, Sanha Kim

Advanced Science, online published, 2025. [doi] [pdf]

76. Modeling framework and discussion of microstructural effects on the formation of Cu–Cu bonding interfaces in semiconductor stacking

Jae-Uk Lee, Hyun-Dong Lee, Sung-Hyun Oh, Young-Dae Shim, Sukkyung Kang, Sanha Kim, Hoo-Jeong Lee, Eun-Ho Lee

International Journal of Plasticity, vol. 195, 104501, 2025. [doi] [pdf]

75. Precision engineering and intelligent technologies for predictable CMP

Somin Shin, Hyun Jun Ryu, Sanha Kim, Haedo Jeong, Hyunseop Lee

International Journal of Precision Engineering and Manufacturing, vol. 26, 2121-2158, 2025. [doi]

74. Origami stacking of micro-fabricated coils for miniatruized eddy current sensors

Dong Geun Kim, Kyunghyun Kim, Seong Jae Kim, Hyeongmin Je, Joohyun Park, Gunhoo Park, Inyeong Yang, Hyun Jun Ryu, Sanha Kim

Sensors and Actuators A: Physical, vol. 395, 117075, 2025. [doi] [pdf]

73. Material removal rate model in chemical-mechanical polishing using micro-structured pads

Seounghee Yun, Hyun Jun Ryu, Sanha Kim

International Journal of Mechanical Sciences, vol. 303, no. 1, 110669, 2025. [doi]

72. Hot-end co-extrusion of multiple thermoplastic filaments for unblended composite additive manufacturing 

Taemin Kim, Sanha Kim

Virtual and Physical Prototyping, vol. 20, e2526797, 2025. [doi] [pdf]

71. A mechanics-based predictive model for scratching defects and its application for pad selection in chemical mechanical polishing

Hyeongmin Je, Dong Geun Kim, Seounghee Yun, Somin Shin, Haesung A. Lee, Hyunsoo Kim, Sanha Kim,

Tribology International, vol. 212, 110934, 2025. [doi] [pdf]

70. Nanoporous capillary gripper for ultragentle micro-object manipulation

Seong Jae Kim, Taehoon Kim, Hyun Jun Ryu, Ji-hun Jeong, A. John Hart, Sanha Kim

Advanced Science, vol. 12, no. 36, e08338, 2025. [doi]

69. Ultrathin 3D Cu/Li composite with enhanced Li utilization for high energy density Li-metal battery anodes

Inyeong Yang, Hyunwoong Baek, Dong Geun Kim, Sanha Kim

Small, vol. 21, no. 32, 2501629, 2025. [doi] [pdf]

68. Autonomous process optimization of tabletop CNC milling machine using computer vision and deep learning 

Filippo Danilo Michelacci, Gyuhyeon Han, Sanha Kim

CIRP Journal of Manufacturing Science and Technology, vol. 60, pp. 153-164, 2025. [doi] [pdf]

67. Particle-on-demand electrohydrodynamic printing from a reciprocating tip

Ji-hun Jeong, Seong Jae Kim, Sanha Kim, A. John Hart

Journal of Manufacturing Processes, vol. 145, pp. 133-141, 2025. [doi] [pdf]

 66. Preface for autonomous manufacturing with green technology

Martin B-G Jun, Young Tae Cho, Sanha Kim, Seok Kim

International Journal of Precision Engineering and Manufacturing-Green Technology, vol. 12, no. 3, 783-784, 2025. [doi] [pdf]

 65. Mitigation of Cu dishing in chemical mechanical polishing using micro-structured pads

Seulah Park, Sukkyung Kang, Dong Geun Kim, Sanha Kim

CIRP Annals - Manufacturing Technology, vol 74, no. 1, 465-469, 2025. [doi] [pdf]

64. Frequency-comb-referenced Terahertz Fabry-Pérot interferometry for monitoring semiconductor wafer thinning process with a nanometer precision   

Guseon Kang, Jaeyoon Kim, Jun Hyung Park, Sukkyung Kang, Dong Geun Kim, Young Jin Kim

CIRP Annals - Manufacturing Technology, vol 74, no. 1, 679-683, 2025. [doi] [pdf]

63. Characteristics of PVD SiCN for application in hybrid Cu bonding   

Junyoung Choi, Suin Jang, Dongmyeong Lee, Sukkyung Kang, Sanha Kim, Sarah Eunkyung Kim

Journal of Semiconductor Technology and Science,  vol. 25, no.  1, 102, 2025. [doi] [pdf]

62. Nanometer-resolution white-light scanning interferometry for surface-profiling of hybrid bonding samples for advanced semiconductor packaging   

Huy Hoang Chu, Dae Hee Kim, Jun Hyung Park, Sukkyung Kang, Jaiho Son, Hyunmin Lee, Hongki Yoo, Seung-Woo Kim, Sanha Kim, Young-Jin Kim

Applied Surface Science, vol. 689, 162466, 2025. [doi] [pdf]

61. Analysis of torque variation in bolt fastening on coated steel surfaces   

Sukkyung Kang, Seounghee Yun, Hyena Hwang, Sanha Kim

Tribology International, vol. 202, 110395, 2025. [doi] [pdf]

60. A pressure-sensitive, repositionable bioadhesive for instant, atraumatic surgical application on internal organs

Kum Seok Nam, Yeji Kim, Geonho Park, Kiwook Hwang, Minyoung Kim, Jooyeun Chong, Jooik Jeon, Congqi Yang, Yung Hsiang Lu, Christian Paniccia, Jeongwon Choi, Dong Geun Kim, Haeseung Lee, Seung Won Oh, Sanha Kim, Jae-Wook Rhyu, Jiheong Kang, Jung Keun Hyun, Jeffrey M. Karp, Yuhan Lee, Hyunwoo Yuk, Seongjun Park 

Advanced Materials, vol. 37, no. 1, 2407116, 2025.  [doi] [pdf] 

59. Size-dependent fracture in elastomers: experiments and continuum modeling  

Jaehee Lee, Jeongun Lee, Seounghee Yun, Sanha Kim, Howon Lee, Shawn A. Chester, Hansohl Cho 

Physical Review Materials, vol. 8, 115602, 2024. [doi] [pdf]

58. Label-free exosome analysis by surface-enhanced Raman scattering spectroscopy with laser-ablated silver nanoparticle substrate

Jong-Eun Park, Hyeono Nam, June Sik Hwang, Seunggyu Kim, Seong Jae Kim, Sanha Kim, Jessie S. Jeon, Minyang Yang

Advanced Healthcare Materials, vol. 13, no. 32, 2402038, 2024. [doi] [pdf]

57. Thin, uniform, and highly-packed multifunctional structural carbon-fiber composite battery lamina informed by solid polymer electrolyte cure kinetics  

Mohamad A. Raja,Su Hyun Lim, Doyun Jeon, Sangyoon Bae, Woong Oh, Inyeong Yang, Dajeong Kang, Jawon Ha, Ha Eun Lee, Il-Kwon Oh, Sanha Kim, Seong Su Kim 

ACS Applied Materials & Interfaces, vol. 16, no. 43, 59128–59142, 2024. [doi]

56. Spatially selective ultraprecision polishing and cleaning by collective behavior of micro spinbots  

Hyeongmin Je, Sukyoung Won, Jeong Jae Wie, Sanha Kim

Small Structures, vol. 5, no. 11, 2400245, 2024. [doi] [pdf]

55. Ru passivation layer enables Cu-Cu direct bonding at low temperatures with oxidation inhibition 

Chansu Jeon, Sukkyung Kang, Myeong Eun Kim, Juseong Park,  Daehee Kim, Sanha Kim, Kyung Min Kim

ACS Applied Materials & Interfaces, vol. 16, no. 36, 48481-48487, 2024. [doi] [pdf]

54. Field-assisted efficient capturing and analysis of airborne nanoparticulate matter using multifunctional nanoporous membrane

Seong Jae Kim, Gaabhin Ryu, Jihae Chang, Dong Geun Kim, Young Ho Park, Young-Jin Kim, Sanha Kim

ACS Applied Materials & Interfaces, vol 16, no. 33, 44261-44269, 2024. [doi] [pdf]

52. Static friction of magneto-rheological elastomer pads in wall-climbing robots

Seounghee Yun, Yong Um, Hae-Won Park, Sanha Kim

CIRP Annals - Manufacturing Technology, vol. 73, no. 1, 441-444, 2024. [doi] [pdf]

51. Nanoribbon yarn with versatile inorganic materials

Junseong Ahn, Yongrok Jeong, Mingu Kang, Jihyeon Ahn, Suchithra Padmajan Sasikala, Inyeong Yang, Ji‐Hwan Ha, Soon Hyoung Hwang, Sohee Jeon, Jimin Gu, Jungrak Choi, Byung‐Ho Kang, Sang Ouk Kim, Sanha Kim, Junhyuk Choi, Jun‐Ho Jeong, Inkyu Park 

Small, vol. 20, no. 38, 2311736, 2024. [doi] [pdf]

50. Programming anisotropic functionality of 3D microdenticles by staggered-overlapped and multi-layered microarchitectures

Jeong Eun Park, Hyeongmin Je, Chae Ryean Kim, Sudong Park, Woongbi Cho, Sukyoung Won, Dong Jun Kang, Tae Hee Han, Rhokyun Kwak, Seung Goo Lee, Sanha Kim, Jeong Jae Wie,  

Advanced Materials, vol. 36, no.7, 2309518, 2024. [doi] [pdf]

49. Engineered vertically-aligned carbon nanotube microarray for self-concentrated SERS detection

Seong Jae Kim, Ji-hun Jeong, Gaabhin Ryu, Yoon Sick Eom, Sanha Kim, 

Sensors and Actuators: B. Chemical, vol. 399, 134861, 2024. [doi] [pdf]

48. An Investigation of Interfacial Strength in Epoxy-based Solid Polymer Electrolytes for Structural Composite Batteries

Mohamad A. Raja, Su Hyun Lim, Doyun Jeon, Hyunsoo Hong, Inyeong Yang, Sanha Kim, Seong Su Kim

Composite Research. vol. 6, no. 36, 416-421, 2023 [doi] [pdf]

47. Accelerated deep-learning-based process monitoring of microfluidic inkjet printing 

Seong Jae Kim, Eunsik Choi, Dong Yeon Won, Gyuhyeon Han, Kunsik Ahn, Kyung-Tae Kang, Sanha Kim,  

CIRP Journal of Manufacturing Science and Technology, vol. 46, 65-73, 2023. [doi] [pdf]

46. Low-profile, large-range compression strain sensing using micro-manufactured CNT micropillar arrays 

Changhong Cao, Michael S. H. Boutilier, Sanha Kim, S. Mohadeseh Taheri-Mousavi, Nigamaa Nayakanti, Ricardo Esteban Roberts-Ugrinovic, Crystal Owens, A. John Hart,  

ACS Applied Materials & Interface, vol. 15, no. 32, 38665-38673, 2023. [doi] [pdf]

45. Pure metallic nanofibrillar membrane for high performance electrostatic air filtration with antimicrobial and reusable characteristics

Seunghun Yoo, Inyeong Yang, Ji-hun Jeong, Jihae Chang, Sanha Kim.

Environmental Science: Nano, vol. 10, 2437, 2023. [doi] [pdf]

44. Additive manufacturing of flexible 3D surface electrodes for electrostatic adhesion control and smart robotic gripping

Dong Geun Kim, Hyeongmin Je, A. John Hart, Sanha Kim,  

Friction, vol. 11, 1974-1986, 2023. [doi] [pdf]

43. Advanced Cu/Polymer hybrid bonding system for fine-pitch 3D stacking devices

Juseong Park, Sukkyung Kang, Myeong Eun Kim, Nam Jun Kim, Jungkyun Kim, Sanha Kim, and Kyung Min Kim

Advanced Materials Technologies, vol. 8, issue 20, 2202134, 2023. [doi] [pdf]

42. Structural color generation on transparent and flexible substrates by nanosecond laser induced periodic surface structures

Srinivasan Arthanari, Jong-Eun Park, Sivakumar Bose, Hyun Wook Kang, Sanha Kim, Minyang Yang, Huseung Lee, June Sik Hwang  

Advanced Materials Technologies, vol. 8, no. 10, 2201725, 2023. [doi] [pdf]

41. Ultrathin high-mobility SWCNT transistors with electrodes printed by nanoporous stamp flexography

Dhanushkodi Mariappan, Sanha Kim, Junjie Zhao, Hangbo Zhao, Ulrich P. Muecke, Karen Gleason, A. John Hart,  

ACS Applied Nano Materials, vol. 6, no. 7, 5075-5080, 2023. [doi] [pdf]

40. Structurally tailored hierarchical Cu current collector with selective inward growth of lithium for high-performance lithium-metal batteries 

Inyeong Yang, Ji-hun Jeong, Jae Young Seok, Sanha Kim,  

Advanced Energy Materials, vol. 13, no. 2, 2202321, 2023. [doi][pdf]

39. Tailoring elastomeric meshes with desired 1D tensile behavior using an inverse design algorithm and material extrusion printing

Seounghee Yun, YoungKyun Ahn, Sanha Kim, 

Additive Manufacturing, vol. 60, 103254, 2022.  [doi] [pdf]

38. Isotropic 3D printing using material extrusion of thin shell and post-casting of reinforcement core

Jihyuck Son, Seounghee Yun, Kundo Park, Seunghwa Ryu, Sanha Kim,  

Additive Manufacturing, vol.58, 102974, 2022. [doi] [pdf]

37. Predictive model for bearing torque in bolt fastening

Sukkyung Kang, Somin Shin, Hyena Hwang, Sanha Kim,  

CIRP Annals – Manufacturing Technology, vol. 71, no. 1, 489-492, 2022. [doi] [pdf]

36. One-step template-free laser patterning of metal microhoneycomb structures

June Sik Hwang, Srinivasan Arthanari, Jong-Eun Park, Minyang Yang, Sanha Kim, Seung-Woo Kim, Huseung Lee, Young-jin Kim,  

Small Methods, vol.6, no. 5, 2200150, 2022. [doi] [pdf]

35. Agile underwater swimming of magnetic polymeric microrobots in viscous solutions

Sukyoung Won, Hyeongmin Je, Sanha Kim, Jeong Jae Wie,  

Advanced Intelligent Systems, vol. 4, no. 6, 2100269, 2022. [doi] [pdf]

34. Geometrical design and SLIPS lubrication for enhancement of negative-pressure-driven internal flow rate in metal pipes 

Dong Geun Kim, Changhwan Jang, Seong Jae Kim, Daegyoum Kim, Sanha Kim  

Tribology and Lubricants, vol. 37, no. 6, 253-260, 2021. [text in Korean] [doi] [pdf]

33. Mechanical abrasion by bi-layered pad micro-asperity in chemical mechanical polishing

Hyun Jun Ryu, Dong Geun Kim, Sukkyung Kang, Ji-Hun Jeong, Sanha Kim

CIRP Annals – Manufacturing Technology, vol. 70, no. 1, 273-276, 2021. [doi] [pdf]

32. Tailoring the surface morphology of carbon nanotube forests by plasma etching: a parametric study

Seongju Seo, Sanha Kim, Shun Yamamoto, Kehang Cui, Junichiro Shiomi, Taiki Inoue, Shigeo Maruyama, A. John Hart

Carbon, vol. 180, 204-214, 2021. [doi] [pdf]

31. Exploring SERS from complex patterns fabricated by multi-exposure laser interference lithography

Seong Jae Kim, June Sik Hwang, Jong-Eun Park, Minyang Yang, Sanha Kim, 

Nanotechnology, vol. 32, no. 31, 315303, 2021.  [doi] [pdf]

30. Strategically controlled flash-irradiation on silicon anode for enhancing cycling stability and rate capability toward high-performance lithium-ion batteries

Jae Young Seok, Sanha Kim, Inyeong Yang, Jung Hwan Park, Jaehak Lee, Sin Kwon and Kyoohee Woo

ACS Applied Materials & Interfaces, vol. 13, no. 13, 15205-15215, 2021. [doi] [pdf] 

29. Recycling silver nanoparticle debris from laser ablation of silver nanowire in liquid media toward minimum material waste

June Sik Hwang, Jong Eun Park, Gun Woo Kim, Hyeono Nam, Sangseok Yu, Jessie S. Jeon, Sanha Kim, Huseung Lee and Minyang Yang, 

Scientific Reports, vol. 11, no. 1, 1-11, 2021. [doi] [pdf ] 

28. Limiting mechanisms and scaling of electrostatically controlled adhesion of soft nanocomposite surfaces for robotic gripping

Michael S. H. Boutilier, Changhong Cao, Nigamaa Nayakanti, Sanha Kim, S. Mohadeseh Taheri-Mousavi, A. John Hart,  

ACS Applied Materials & Interfaces, vol. 13, no. 1, 2021. [doi] [pdf]

27. High-speed production of crystalline semiconducting polymer line arrays by meniscus oscillation self-assembly 

Jisoo Jeon, Alvin T.L. Tan, Jaeyong Lee, Jeong Eun Park, Sukyoung Won, Sanha Kim, Mostafa Bedewy, Jaminson Go, Jin Kon Kim, A. John Hart, Jeong Jae Wie, 

ACS Nano, vol. 14, no. 12, 17254-17261, 2020. [doi] [pdf]

26. Efficient capture and Raman analysis of circulating Tumor Cells by nano-undulated AgNPs-rGO composite SERS substrates

Jong-Eun Park,  Nuri Oh, Hyeono Nam, Ji-Ho Park, Sanha Kim, Jessie S. Jeon, Minyang Yang,

Sensors, vol. 20, no. 18, 5089, 2020. [doi] [pdf]

25. A precision desktop plate-to-roll apparatus for development of advanced flexographic printing processes

Dhanushkodi Mariappan, Sanha Kim, A. John Hart,   

Precision Engineering, vol. 66, pp. 392-400, 2020. [doi] [pdf] 

24. Hierarchically porous carbon nanofibers with controllable porosity derived from iodinated polyvinyl alcohol for super capacitors

Jae Young Seok, Seung A Song, Inyeong Yang, Kyoohee Woo, Jung Hwan Park, Sanha Kim, Seong Su Kim, Minyang Yang,  

Advanced Materials Interfaces,  vol. 7, no. 6, 2000513, 2020. [doi] [pdf]

23. Delayed frost growth on nanoporous microstructured  surfaces utilizing jumping and sweeping condensates

Behrouz Mohammadian, Rama Kishore Annavarapu, Asif Raiyan, Srinivasa Kartik Nemani,  Sanha Kim, Minghui Wang, Hossein Sojoudi.

Langmuir, vol. 36, no. 24, 6635-6650, 2020. [doi] [pdf]

22. Strong, ultralight ceramic-carbon nanofoams with extreme recovery and dissipation via manipulation of internal adhesive contacts

Sei Jin Park, Jungho Shin, Daniel J. Magagnosc, Sanha Kim, Changhong Cao, Kevin T. Turner, Prashant K. Purohit, Daniel S. Gianola, A. John Hart,  

ACS Nano, vol. 14, no. 7, 8383-8391, 2020. [doi] [pdf] 

21. Shape-programmed fabrication and actuation of magnetically active micropost arrays

Jisoo Jeon, Jeong Eun Park, Sei Jin Park,  Sukyoung Won, Hangbo Zhao, Sanha Kim, Bong Sup Shim, Augustine Urbas, A. John Hart, Zahyun Ku, Jeong Jae Wie, 

ACS Applied Materials & Interfaces, vol. 12, no.14, 17113-17120, 2020. [doi] [pdf]

20. On-demand orbital maneuver of multiple soft robots by hierarchical magnetomotility

Sukyoung Won, Sanha Kim, Jung Eun Park, Jisoo Jeon, Jeong Jae Wie, 

Nature Communications, vol. 10, 4751, 2019. [doi] [pdf]

19. Soft nanocomposite electroadhesives for digital micro- and nanotransfer printing

Sanha Kim, Yijie Jiang, Kiera L. Thompson Towell, Michael S. H. Boutilier, Nigamaa Nayakanti, Changhong Cao,  Chunxu Chen, Christine Jacob, Hangbo Zhao, Kevin Turner, A. John Hart, 

Science Advances, vol. 5, no. 10, eaax4790, 2019. [doi] [pdf] 

18. Microstructured ceramic-coated carbon nanotube surfaces as high heat flux pool boiling interfaces

Hangbo Zhao, Susmita Dash, Navdeep Singh Dhillon, Sanha Kim, Bethany Lettiere, Kripa K. Varanasi, A. John Hart,

ACS Applied Nano Materials, vol. 2, no. 9, 5538-5545, 2019. [doi] [pdf] 

17. Delamination force measurements on carbon nanotube micropillars

Joe Brown, Taher Hajilounezhad, Nick Dee, Sanha Kim, A. John Hart, Matthew R. Maschmann, 

ACS Applied Materials & Interfaces, vol. 11, no. 38, 35221-35227, 2019. [doi] [pdf]

16. Additive manufacturing of biomechanically tailored meshes for compliant wearable and implantable devices

Sebastian W. Pattinson, Meghan E. Huber, Sanha Kim, Jongwoo Lee, Sarah Grunsfeld, Ricardo E.R. Ugrinovic, Gregory Dreifus, Christoph Meier, Lei Liu, Neville Hogan, A. John Hart, 

Advanced Functional Materials, vol. 29, no. 32, 1901815, 2019. [doi] [pdf]

15. Dynamics of liquid transfer from nanoporous stamps in high-resolution flexographic printing

Dhanushkodi Mariappan, Sanha Kim, Michael Boutilier, Junjie Zhao, Hangbo Zhao, Justin Beroz, Ulrich Muecke, Hossein Sojoudi, Karen G. Gleason, Pierre T. Brun, A. John Hart,

Langmuir, vol. 35, no. 24, 7659-7671, 2019. [doi]  [pdf]

14. Synthetic butterfly scale surfaces with compliances-tailored anisotropic drop adhesion

Hangbo Zhao, Sei Jin Park, Brian Solomon, Sanha Kim, Yu Zou, Kripa K. Varanasi, A. John Hart,  

Advanced Materials, vol. 31, no. 14, 1807686, 2019. [doi] [pdf]

13. Explaining evaporation-triggered wetting transition using local force balance model and contact line-fraction

Rama Kishore Annavarapu, Sanha Kim, Minghui Wang, A. John Hart, Karen K. Gleason, Hossein Sojoudi, 

Scientific Reports,  vol. 9, no. 1, 405, 2019. [doi] [pdf]

12. Stable wettability control of nanoporous microstructures by iCVD coating of carbon nanotubes

Hossein Sojoudi, Sanha Kim, Hangbo Zhao, Rama Kishore Annavarapu, Dhanushkodi Mariappan, A. John Hart, Gareth H. McKinley, Karen K. Gleason, 

ACS Applied Materials & Interfaces, vol. 9, no. 49, 43287-43299, 2017. [doi] [pdf] 

11. Ultrathin high-resolution flexographic printing using nanoporous stamps

Sanha Kim, Hossein Sojoudi, Hangbo Zhao, Dhanushkodi Mariappan, Gareth H. Mckinley, Karen K. Gleason, A. John Hart, 

Science Advances, vol. 2, e1601660, 2016. [doi] [pdf] 

10. Predictive synthesis of freeform carbon nanotube microarchitectures by strain-engineered chemical vapor deposition

Sei Jin Park, Hangbo Zhao, Sanha Kim, Michael De Volder, A. John Hart, 

Small, vol. 12, no. 32, pp. 4393-4403, 2016. [doi] [pdf]

9.  High-fidelity replica-molding of glassy liquid crystalline polymer microstructures

Hangbo Zhao, Jeong Jae Wie, Davor Copic, Ryan Oliver, Alvin Orbaek White, Sanha Kim, A. John Hart, 

ACS Applied Materials & Interfaces, vol. 8, no. 12, pp. 8110-8117, 2016. [doi] [pdf]

8. Three-dimensional machining of carbon nanotube forests using water-assisted scanning electron microscope processing

Bahram Rajabifar, Sanha Kim, Keith Slinker, Gregory J. Ehlert, A. John Hart, Matthew R. Maschmann, 

Applied Physics Letters, vol. 107, 143102, 2015. [doi] [pdf] 

7. Scratching of patterned Cu/dielectric layers by pad asperities in chemical-mechanical polishing

Sanha Kim, Nannaji Saka, and Jung-Hoon Chun, 

IEEE Transaction on Semiconductor Manufacturing, vol. 28, no. 1, pp. 96-105, 2015. [doi] [pdf] 

6. The effect of pad-asperity curvature on material removal rate in chemical-mechanical polishing

Sanha Kim, Nannaji Saka, Jung-Hoon Chun, 

Procedia CIRP, vol. 14, pp. 42-47, 2014. [doi] [pdf]

5. The role of pad asperities in chemical-mechanical polishing

Sanha Kim, Nannaji Saka, Jung-Hoon Chun, 

IEEE Transaction on Semiconductor Manufacturing, vol. 27, no. 3, pp. 431-442, 2014. [doi] [pdf]

4. Pad scratching in chemical-mechanical polishing: Effects of mechanical and tribological properties

Sanha Kim, Nannaji Saka, Jung-Hoon Chun, 

ECS Journal of Solid State Science and Technology, vol. 3, no. 5, pp.169-178, 2014. [doi] [pdf] 

3. Modeling and mitigation of pad scratching in chemical-mechanical polishing

Sanha Kim, Nannaji Saka, Jung-Hoon Chun, Sung-Ho Shin, 

CIRP Annals – Manufacturing Technology, vol. 62, pp. 307-310, 2013. [doi] [pdf]

2. Hybrid micromachining using a nanosecond pulsed laser and micro EDM

Sanha Kim, Bo Hyun Kim, Do Kwan Chung, Hong Shik Shin, Chong Nam Chu, 

Journal of Micromechanics and Microengineering, vol. 20, 015037, 2010. [doi] [pdf]

1. Micromachining using hybrid of laser beam and electrical discharge machining

 Sanha Kim, Do Kwan Chung, Bo Hyun Kim, Kwang Hwan Oh, Sung Ho Jeong, Chong Nam Chu, 

Journal of the Korean Society for Precision Engineering, Vol. 26, No. 10, pp. 108-115, 2009. [text in Korean] [pdf]